Multiport serial cards for EIA 232 and EIA 422 connections with a range of connectivity options. Some cards are supplied with connectors and some are bare boards with connectors selected from the accessory or cable sections. Accessories and connectors for multiport cards and other products.
Accessories and connectors for multiport cards and other products. Please check carefully that you are selecting the correct accessory, connector or cable for the card or server which you are purchasing.
Note: Prices in this section assume that the items are being purchased with a multiport card or device/terminal server. If purchased separately, then prices may be higher. Please contact for a price.
Networking Products
Entrix is a UK distributor of switches, media converters, transceivers and wireless networking products from USA manufacturer Transition Networks (incorporation MiLAN Technology products)
Console Management Solutions
Keep Systems Running 24x7 – No Matter Where They Are…
Computer systems are critical to the operations and profitability of businesses. Technical staff are under pressure to provide around the clock availability without increasing budgets. If a server has to be restarted or diagnosed while it’s off the network, the only answer is a proper Console Management solution. Console Management combined with remote power management, provides a flexible approach to the remote management of systems that allows true lights-out operation for data centres and remote sites.
We recommend the Perle IOLAN SCS Secure Console Servers. These can also be used in conjunction with the Perle RPS remote power switches if you need to turn devices or servers on and off remotely.
Our Suppliers
Entrix supplies you with the best products to connect to systems by remote access or to provide expanded serial connectivity from devices to systems or system to system.
We have considerable experience in working with process control users, VARs, system integrators and developers to employ port devices on expansion cards or using USB or Ethernet.These give high performance with full line control at a very affordable price for UNIX and Windows 9x, XP, 2000 and NT.
We supply world class products from these distributors:
Remote Access Servers
Remote Access Servers.
Serial Over Ethernet
For when you need to access serial devices over the network
Entrix sells a large range of devices providing serial connectivity over ethernet networks. These go from single device servers with one EIA232 or MEI (EIA 232/422/485) port right through to 32 port terminal servers.
Select the product groups below for more details but don't forget that you can always call and talk to our sales and technical staff for advice in choosing a solution. There are many options and we want to ensure that you get the right one.
White Papers
Migrating from serial to ethernet - Performance Impacts
Multiport Serial Cards
Multiport serial cards for EIA 232 and EIA 422 connections with a range of connectivity options. Some cards are supplied with connectors and some are bare boards with connectors selected from the accessory or cable sections.
Embedded Modules and Microprocessors
Built on leading NetSilicon® 32-bit NET+ARM technology, the Digi Connect product line is the industry's first family of wired and wireless interchangeable embedded modules with plug-and-play firmware option and complete and royalty-free development tools. Custom software applications developed using the NET+Works® development platform can fully migrate across all Digi Connect products and to a fully integrated NET+ARM system-on-chip solution.
Clearance Items
Equipment available from stock clearance. Some items are new but old stock and some are ex-demonstration or ex-support units. See the description. All are at much reduced prices and warranted for 30 days from shipment.
Bluetooth Wireless Communications
For When You Need it to be Wireless
For communication up to 100 metres, Bluetooth offers an excellent wireless communication method for many tasks, including the ability to connect serial devices (EIA 232) which would otherwise require a cable.
Take a look at the range of Bluetooth adapters for PCs and the Wavespeed/S Class 1 and Class 2 Bluetooth-serial adapters from Digi International.
Wireless 802.11 Solutions
Wireless 802.11b/g connectivity equipment.
We are in the process of loading this huge product list on to our website and grouping it in accessible way so please bear with us while we complete this work.
All the products are in the system so you can search by part number or a portion of the part number but we haven't completed the browsing sections yet.
If you have any questions, please do not hesitate to call on 01480 414131.
Entrix is a distributor for Transition Networks, which includes MiLAN Technologies and thus is able to offer access to their comprehensive range of media converters.
KVM Switches from Adder
Entrix is pleased to offer the full range of Keyboard Video Mouse (KVM) switches from Adder Technology here in the UK.
These include simple desktop KVM switches, DVI switches for the latest high speed digital video technology, extenders to access systems up to 200 metres away, and IP KVMS like the AdderLink IP for secure and efficient access to KVMs and systems over IP networks.
Click on the datasheet link below to download the complete Adder KVM catalogue or take a look at the sections and products following.
Industrial connectivity and interfacing
Many of our products in all sections have industrial applications but this section lists those which are primarily aimed at the industrial market including those for interfacing to PLC systems such as Allen Bradley.
Patton Voice and Telephony Over IP
How Can You Profit From Saving Your Customers Money?
Most companies are still using traditional analogue or digital phone lines and paying for every call outside. It’s now possible to use broadband Internet connections for reliable telephone calls and save money, especially if you have multiple sites or tele-workers.
SmartNode VoIP telephony solutions
These VoIP gateway, VoIP router, and VoIP telephony solutions really work and with Patton’s unique Downstream QoSTM they give all the advantages of VoIP without the fear of poor voice quality.
Assured Voice Quality
Over six years running Patton has been developing and refining their advanced SmartNode VoIP technology. Patton puts it into every SmartNode VoIP router and VoIP gateway they make
SmartNode offers VoIP gateway and VoIP router solutions with virtually every VoIP telephony interface, including ISDN PRI & BRI, T1, E1, FXS, FXO, and more. Plus SmartNode supports SIP, H.323, and MGCP VoIP technologies. That means SmartNode VoIP technology solutions will fit your network.
Among VoIP technologies, SmartNode is mature. Tested and deployed in hundreds of real-world networks, SmartNode enterprise VoIP telephone and VoIP provider solutions are fully proven. That's why enterprises, carriers, and VoIP providers all over the world choose Patton SmartNode.
Cellular Remote Access and WAN
This section has moved to Routers > Cellular
Copper Ethernet Extenders
Overview
The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services at up to 12.5 Mbps! The Patton CopperLink extenders offer premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.
CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you're ready to operate. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required!
Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!
External RAS solutions
Self contained and often rack-mounted units for remote access using analogue or ISDN dial-up.
Digi Acceleport XE
Intelligent serial I/O for small to medium workgroups.
Designed to deliver fast, reliable connections for multiuser workgroups, the AccelePort® Xe multiport serial adapter is a low-priced solution for supporting terminals, printers, modems and other asynchronous peripherals. Recommended for point-of-sale, data acquisition, factory automation, and industrial control applications, the AccelePort Xe is among Digi's most popular selling add-in solutions. Equipped with powerful on-board I/O processing to reduce host CPU utilization, and supplied with full modem control and hardware handshaking, the AccelePort Xe easily accommodates the varying connectivity needs of small to medium sized workgroups.
EIA-232 models are available in two-, four- or eight-port models, while the EIA-422 models are offered with four or eight ports. The EIA-422 solutions enable users to transmit signals over greater distances and at higher speeds than standard EIA-232 communications and are generally immune to electrical interference and surges. These benefits make the EIA-422 solution a smart choice for industrial and manufacturing applications as well as widespread point-of-sale operations.
The AccelePort Xe supports a broad spectrum of operating environments–from SCO®, Novell®, Linux®, and Microsoft®. Other device drivers are available from Digi's Web site or FTP server.
Digi AcceleportXP
The AccelePort® Xp Universal PCI (3.3V & 5V) cards are powerful, highly integrated 80 Mhz RISC processor-based products that deliver the highest level of intelligence and performance available on the market. The availability of two to 16 high-speed serial ports per card, the wide array of connector options, the small low profile form factor, and the industry leading surge protection on each signal provides wide application flexibility. The AccelePort Xp was designed to further enhance multi-user (retail point-of-sale, industrial control processing, data collection and office automation) implementations in a broad range of operating systems with an unrivaled feature set and excellent throughput of 921.6 Kbps, bi-directionally on each serial port.
Digi Acceleport XEM
The AccelePort Xem asynchronous concentrator is an expandable, modular and intelligent serial communication solution designed specifically for small to mid-size multiuser installations. It is especially well-suited to applications that are expected to start small and grow over time, to as many as 64 ports. This flexible system features a host adapter with an on-board RISC-processor that allows you to connect up to 64 EIA-232 or EIA-422 serial ports to a PCI- or ISA-based system. The result is a fast, reliable way to connect terminals, printers, modems, instruments and other serial peripherals, making it ideally suited to applications such as data acquisition, office/factory automation, and industrial process control.
NOTE: If you are ordering a host adapter rather than a "kit", and you don't already have the Ports module, you will need to select a suitable Ports Module here.
Dici PC/X serial cards
The Digi PC/X is a non-intelligent multichannel serial communication board available in four, eight and 16-port configurations. The PC/X is compatible with Industry Standard Architecture (ISA) bus systems. The Digi PC/X is ideal for use in small multiuser workgroup systems, multiple point data acquisition, office and factory. Full modem support is provided for every serial port. Terminals, printers, modems, plotters, mice and other asynchronous serial peripherals are all fully supported. The Digi PC/X hardware is known for its compatibility with a wide range of operating systems. Put them to work for you today, and see why Digi connectivity solutions are the smartest connection you can make.
Digi Neo Serial Cards
As the Smallest Multiport Serial Card available today, the Digi Neo is the latest addition to Digi’s family of intelligent multiport serial cards.The unique half-height size of the Digi Neo makes it the smallest form factor serial card solution on the market today.
The Digi Neo leverages an Application Specific Integrated Circuit (ASIC) to provide throughput speeds exceeding 460.8 Kbps, large buffers for data transfer, and baud rate customization. These features, along with surge suppression and the availability of drivers for all the most popular operating systems, make the Digi Neo ideal for point-of sale, industrial automation, factory control, kiosks, and data collection applications.
The extensive cabling options of the Digi Neo (RJ-45, DB-9, DB-25) set a new standard for ease-of-installation and connector reliability while delivering the only solution for tighter workspaces and specialized server/PC environments.
The Digi Neo provides an enhanced software monitoring and diagnostic tool for Windows® operating systems. A similar tool for Unix and Linux operating systems also supports the Digi Neo.
Digi Classic Boards
The ClassicBoard Family provides an array of ISA- and PCI- based options to help you easily meet a variety of end-user needs. The four- and eight-port EIA-232 models are offered with a choice of DB-25, DB-9 or RJ-45 connectors. Four- and eight-port EIA-422 models are also available.
Single port device servers from Digi and Perle
Single port device servers that provide simple, reliable and cost- effective network connections for serial devices.
Digi Etherlite Terminal Servers
Digi International's EtherLite Terminal Servers make adding 2 to 32 or more RS-232, RS422 and RS-485 serial ports to your network easy. They blend the control and performance of local ports with the convenience of an Ethernet connection.
Since the EtherLite ports are real serial devices, they aren't weighed down by complex network terminal server overhead. The result is a much simpler configuration, less Ethernet congestion, and a much lower cost per port when compared to conventional Ethernet terminal servers.
EtherLite Terminal Servers are compatible with UNIX® workstations and servers from Sun, HP, IBM, and DEC, and with systems running Windows NT/2000®, Java™, or SCO.
Reduced Ethernet Traffic: EtherLite Terminal Servers are not typical Ethernet terminal servers. The traffic from all 2, 8, 16 or 32 EtherLite ports is serviced by a single TCP/IP session, compared to the conventional one-session-per-port method. The obvious EtherLite benefit is less overhead at the host, and less traffic on Ethernet. EtherLite serial ports appear as local ttys under UNIX and as native COM ports under Windows NT. These locally-administered, full "hardware-style" ports allow much greater control than standard terminal server ports.
Easy Installation: Operating system drivers (Windows NT or UNIX) are provided free with each unit on CD-ROM. Simply attach the units to twisted-pair Ethernet, load the device driver on a UNIX or NT host, and set the IP address.
Internal RAS Boards
Remote Access server boards including on-board analogue or ISDN or DSP based dual mode modems (analogue/ISDN).
Digi Portservers
Digi's external serial servers provide full network connectivity to virtually any serial device. They include a reliable TCP/IP protocol stack, remote management capabilities, both serial and network interfaces, and Digi's patented RealPort® COM port redirector for a fully transparent COM or TTY connection.
Digi Wireless Port and device servers
Serial interfacing over wireless 802.11 ethernet. Provides for easy placement of device connections in environments that are hard to wire up.
We offer products from Digi International (802.11b) and Moxa (802.11a/b/g).
Serial to USB converters
Serial to USB converters. Many devices require serial connections but increasingly PCs are being supplied with no serial connections, only USB. This is particularly true of laptop computers.
Our range of USB to serial provides a solution to this problem for 1 to 16 ports. Also, with our AnywhereUSB product, you can take them out on to the network.
Edgeport Series for Microsoft Windows 95 & 98, 2000, XP, XP Embedded, NT4.0, NT Embedded, CE, Me, SE and Linux.
Product includes one 1m USB interface cable and user documentation
PORTS Connector Modules for Digi Acceleport XEM and Portservers
Connector modules for use with Acceleport XEM boards or Portserver II servers.
Modules/Rackmounts/Accessories
Modules, 19-inch Rack Mount Assemblies and Switch Mounting Brackets from Milan Technology.
USB Cameras
The Watchport/V3 camera is a high performance USB camera designed for kiosks, ATMs, point-of-sale, ID badging, mobile computing, webcam, or any mission-critical application utilizing camera surveillance. They offer exceptional low light sensitivity (<1 lux), 30 fps USB frame rates at all resolutions and enhanced resolution to deliver optimal picture quality. An optional lens kit is available for complete customization. Watchport cameras are USB powered and offer Plug and Play installation for easy integration into any new or existing application.
Watchport/FastAccess facial recognition software is now available for use with the Watchport cameras.
Create a PC access control system without the use of passwords or tokens
For a limited time, receive a free software download of Digi's motion detection software when you purchase a Watchport USB camera.
802.11b/g Access Points, Bridges, Adapters and Antennae
ShAir OfficeTM, ShAir FiberTM, ShAir AccessTM PC Card Client, ShAir AccessTM USB Client, ShAir BridgeTM, ShAir BridgeTM Antennas and EmPowered EthernetTM from Milan Technologies.
MiLAN ShAir products offer a quality range of 802.11b and 802.11g solutions for your wireless networking requirements with high performance and cost effective products indoors as well as long distance WiFi capability outdoors.
Digi Acceleport C/X
A single AccelePort C/X host PCI Universal (3.3V & 5V) adapter, which includes a powerful on-board processor, can support up to eight C/CON Concentrators, providing up to 128 surge-protected ports from a single slot on your server. A system can start out with eight or sixteen ports and easily expand by adding C/CON concentrators. For ease of installation and optimum flexibility, the concentrators can be located up to 1,000 feet (305 meters) from the host server. A fiber optic cabling option allows you to locate your workgroups up to 1.25 miles (2 km) apart.
The AccelePort C/X System integrates easily into any computing environment that requires widespread or remote connections. Compatible with a broad range of terminals, printers, modems and most other asynchronous serial peripherals, it's a logical choice for multiple-point data acquisition, order entry, point-of-sale, and office/factory automation applications. Best of all, by using synchronous modems or a multiplexer (MUX), you can locate concentrators anywhere in the world and enjoy a seamless extension of your system. The perfect answer for remote office connections, these concentrators are a field-proven solution for supporting branch offices and isolated warehouses.
GPRS/3G/Edge/HSDPA Cellular Routers
Entrix sells a strong range of cellular wireless routers from Digi International and Sarian Systems.
These products give you the ability to connect devices and networks over the cellular network at varying speeds according to the cellular coverage and the speeds required for your application.
These products are perfect for mobile applications, first fix sites, temporary networks, telemetry where ADSL or other Internet provision is not available and can also be used as backup for fixed lines for mission critical applications.
Accessories
Digi USB accessories make it easy to customize your product to meet unique application requirements. Cables, rack mount kits and shelves are available, as well as the USB Upgrade Kit*, which adds USB 1.1 connectivity to a PC or server.
Environmental Monitoring Sensors, Cameras, Intrusion Detection
The Watchport Series is the first complete line of Plug-and-Play USB devices for 24/7 environmental monitoring. Choose from sensors for proximity, humidity & temperature, water, and temperature, as well as vision components including the Watchport/V USB Camera. Creating a made-to-order monitoring system with Watchport can pre-empt damage to equipment and facilities and also reduce costly system downtime and maintenance. Watchport Manager software provides centralized device status and historical data logging, and allows the easy integration of multiple Watchport devices without additional software development. The customizable software can send email, beeper or phone alerts when undesirable conditions are detected, making it ideal for remote monitoring in point-of-sale (kiosks, ATMs), medical and server room applications.
Hubs
The Hubport offers a simple solution for adding Universal Serial Bus (USB) ports to a PC, server or thin client. This external, user installable solution plugs into an existing USB port to provide four or seven additional USB ports. Use the Hubport to connect USB peripheral devices to your machine, or stack and power additional Edgeport and Rapidport units to meet ever-changing I/O connectivity needs.
Hubport/PCI products provide powered USB ports in PCI cards.
Small Form Factor Pluggable Modules
Transition Power Over Ethernet Media Converters
Connectors/Cables/Adapters
Various connectors, cables, adapters, gender changers etc. Clearance stock.
USB Ethernet Devices
For when you need USB over Ethernet
The AnywhereUSB Remote I/O Concentrator leverages a wired or wireless LAN for remote host USB device connectivity. This Ethernet-attached solution utilizes the inherent performance and reliability of plug-and-play USB connectivity, providing five USB ports to connect peripheral devices like cameras or printers, which can be controlled from a remote server or PC via an IP address. AnywhereUSB increases network security and allows systems to be deployed in harsh environments, making it an ideal solution for enterprise applications such as surveillance, indoor/outdoor kiosks and industrial automation.
Cables and Adapters
Cables and cable adapters for use with Portservers, Digi CM and device servers.
Please ensure that you have the right cable or adapter before ordering and if in any doubt, please call to check.
If you are in need of connector boxes or fan out cables for multiport serial cards, these will be found in the Accessory section in the appropriate product range for the card.
Eg. XEM, XP-Neo, XR-E-Class-PC, etc.
Digi Datafire Cables
Cabling solutions for the Digi Datafire family
Modem Cables and Adapters
Modem cables and adapters
Connectors for Acceleport XEM modular multiport system
Cables and connectors for Acceleport XEM cables. See also PORTS modules which are used for both Portserver and XEM systems.
Connectors and accessories for device servers
Brackets and cabling for Digi device servers
SmartNode 4110 Series Telephony over IP Access Device
The SmartNode 4110 VoIP Media Gateway
supports up to eight FXS or FXO telephone connections. Connect PSTN Lines, PBXs, and standard phones for voice and fax over any IP network. Now the corporate, small, or remote office can access Internet telephony services, eliminate toll charges and route calls to and from the PSTN, Internet, or LAN.
The SmartNode 4520 ToIP Gateway-Router
supports up to eight FXS or FXO telephone connections. Combine Voice over IP with advanced Quality of Service (QoS) and full Internet access and security features to provide best in class service and voice quality. This integrated access router and VoIP Gateway benefits both service providers and enterprise network administrators with a lower cost of ownership and better service quality.
The SmartNode 4830 Series
connects up to 8 phone lines, VoIP, and Internet/VPN access across integrated synchronous PPP and Frame Relay links. Offering bundled voice, data, and VPN services, the SmartNode IAD delivers best-in-class VoIP quality for lowest cost networking.
The SmartNode 4900
delivers the benefits of VoIP, the convenience of standard FXS analog ports, and full WAN routing features. With up to 32 FXS ports for MTU/MDU, call center, or multiport PBX installations, the IpChannel Bank bridges the gap for converged voice and network services.
Analog VoIP SoHo Routers
The SmartLink 4020 VoIP SoHo Router connects your LAN, standard analog phones, and fax to any IP network. This full-featured IP router includes VPN/Security and Quality of Service for converged low-cost sales-office/telecommuter voice data communications.
Features and Benefits
Digital VoIP Routers
The SmartNode 1200 BRI VoIP Media Gateway provides two simultaneous connections for transparent voice, fax, and data over any IP network. With its dual BRI ports, a single phone can access packet-voice while still connecting to the local PSTN telephone system.
Allowing the small office/remote office to lower communication costs over any IP link, the SmartNode 1400 Multiport BRI VoIP Media Gateway provides four voice-over connections with QoS for transparent voice, fax, and data calls.
The SmartNode™ 4552 is the perfect way for ITSPs and SMEs to deliver integrated ISDN phone/fax & data services to SoHo users. Supporting two simultaneous BRI/So calls over any broadband access network, this cost-effective, feature-rich, QoS VoIP router is the single-box CPE solution for converged voice-and-data communications.
The SmartNode 4630, with up to 5 BRI ports and 8 simultaneous voice channels, is the best way to connect ISDN networks to the world of voice over IP. It enables small offices/remote offices to lower communication costs and provides business-class Internet telephony for demanding ISDN users.
Digi Connect ME 1 port Serial-Ethernet Device Server Module
Built on leading 32-bit ARM technology using the network-attached NetSilicon NS7520 microprocessor, Digi Connect ME combines true plug-and-play functionality with the freedom and flexibility of complete product customization options. It is based on the NetSilicon NET+Works development platform and the unique Integrated Systems Architecture (ISA), which streamlines the entire software development process and ensures a future-proof application design.
Digi Connect ME is pin-compatible and interchangeable with Digi Connect® Wi-ME, making it easy to migrate to a wireless solution without the traditional complexities of hardware and software integration work.
Connector options for Acceleport XP and Neo Multiport cards
Connector options for Acceleport XP and Neo Multiport cards including fan-out cables and connector boxes.
Digi connector box assemblies consist of a single DB-78M connector at the adapter end, connected by a cable to a four or eight-port box equipped with four or eight DTE-wired DB-25 male connectors. AccelePort 16p adapters have two connectors, which may be connected to two 8-port boxes or a 16-port rack-mount box. IMPORTANT! The Digi Neo and AccelePort Xp families use different connector box assemblies from those used with ClassicBoard and other Digi adapters (AccelePort Xr, Xe, PC/X). When ordering, be sure to use the part number that corresponds to your adapter type.
Connectors for Acceleport XR, XE, Classicboard and PC Cards
Connectors for Acceleport XR, XE, Classicboard and PC Cards including fanout cables and connector boxes.
Digi connector box assemblies consist of a single DB-78M connector at the adapter end, connected by a cable to a four or eight-port box equipped with four or eight DTE-wired DB-25 male connectors. AccelePort 16p adapters have two connectors, which may be connected to two 8-port boxes or a 16-port rack-mount box. IMPORTANT! The Digi Neo and AccelePort Xp families use different connector box assemblies from those used with ClassicBoard and other Digi adapters (AccelePort Xr, Xe, PC/X). When ordering, be sure to use the part number that corresponds to your adapter type.
Powered USB
The Digi USB Plus Series utilises USB PlusPower, or powered USB, technology to eliminate external power supply bricks for USB peripheral devices like printers, bar-code scanners and signature capture devices. Available in card and hub solutions, the USB Plus series can save space and simplify system architecture by transforming a low-cost PC into a high-performance, powered USB-compatible retail system. Each product offers four powered USB ports with cable locking mechanisms, which also are compatible with standard USB devices.
Hubport/4+ is an externally powered hub that connects to a PC’s USB port.
Hubport/PCI+, a card solution, is available in both internally powered and externally powered versions. Hubport/PCI+ utilizes power balancing to provide maximum power to 12 volt and 24 volt peripherals without exhausting the PC’s five- or 12-volt power.
For added flexibility, the externally powered Edgeport/42+ offers four powered USB and two EIA-232 serial DB-9 ports, allowing the connection of powered USB, standard USB and legacy serial devices to a single box.
Managed Switches
Managed switches from MiLAN/Transition Networks.
Unmanaged Switches
Unmanaged switches from MiLAN/Transition Networks
Microsens Industrial Switches
The MICROSENS industrial switch offers the implementation of powerful Ethernet network structures according to IEEE802.3u especially in production and automation areas.
With this switch it is possible to connect production systems like control systems, roboters and CNC machines which are having an intergrated Ethernet interface. Due to the use of the switching technology the connection is collision free.
All important parameters of industrial machines like a robust design, high availability and fail safety are given by the use of these high quality products. The switch offers the connection of up to four end devices with 10/100Base-TX. The ports are configuring itself to the speed of the connected devices (10/100 autonegotiation).
For the connection to the central distribution the switch has an integrated 100Base-FX uplink. Depending on the requirements this port can be configured in half or full duplex mode. The autocrossing feature of the switch detects the pinout of the TX port. This has the advantage that it is possible to use always standard patch cables.
Powered Ethernet Injectors and Splitters
Transition Point System™ Chassis
The Point System™ is a cost effective, fully configurable, managed modular media conversion platform that provides users with the flexibility to build their own custom media conversion system. The system includes rack mountable chassis and modular, hot-swappable slide-in-cards. Each Point System™ Slide-In-Module media converter, regardless of protocol, can slide into the same chassis and provide managed media conversion services to suit a custom network application.
Cost Savings
Transition's media converters allow users to only pay for fiber ports used when adding fiber to their networks. Combining media conversion with copper-based equipment can save up to 45% in cost. The Point System™'s modular design allows users to add converters as they need to add fiber to their network. Therefore, users can utilize their existing copper-based equipment and not buy fixed multiport fiber devices.
Flexibility
Because the cards are modular, users can add them gradually when fiber is added to the network and the network grows. All card blades are hot-swappable and powered by chassis power supplies. The modularity also means that the Point System supports a mix of various protocols in the chassis. For example, a 19-slot chassis could be populated with 19 homogenous or unique converters (e.g. (Ethernet, T1/E1, ATM or OC-12). Network designs differ widely, so Transition Networks has introduced a variety of chassis models to address each specific need. The chassis cabinets are available in 19, 18, 13, 8, 2, or 1 slots.
Maximum Control
Administrators continuously monitor the network, allowing them to quickly respond to and troubleshoot possible issues. Configuring the network is essential to the administrators as no one has a perfect network that can run without any intervention. To improve the efficiency and save response time administrators turn to SNMP management because it offers them considerable cost savings by eliminating the need to send a technician to a remote location and by improving the accuracy of the configuration.
The Point System™ offers a full control over the media conversion process. This full control translates into three major aspects of network management. It offers:
Reliability
Network uptime is crucial and the Point System™ includes several features that will ensure your network will stay up and running. The Point System™ Chassis offers a redundant power option. Each chassis is shipped with one power supply. The chassis can accommodate a second power supply. Power supplies are available for AC or DC power. The power supplies are hot swappable so they can be replaced while the chassis is running. The instant fail-over bus ensures that if one power supply fails, the second power supply will keep the chassis up and running.
Redundancy of SNMP management is also available by placing two primary management modules in a chassis or a stack of chassis. The management modules negotiate primary and secondary responsibility to manage the chassis or stack of units. In the event the primary management module fails the secondary unit takes control.
Furthermore, each individual converter maintains its feature configuration within a microcontroller on the converter card. If a management module fails the cards will stay up and running because the configuration information is not lost with the loss of a management module. Each card and power supply has built in surge protection to protect the unit from power surges. The power supplies are equipped with a standard 4-amp fuse and can be repaired in the field.
When multiple chassis are connected to each other the SNMP management protection in case of failure becomes critical. Healing Bus enables the users to maintain full control of the daisy chained chassis so that the failure of any one module will not effect remaining modules in the stack.
Potential for Future Growth
Point System™ bridges the gap between continuous development of new networking technologies and the long-term nature of an investment in networking gear. Transition Networks has implemented several features that will allow you to keep your Point System™ Chassis current. Each of the management modules can be updated via firmware upgrade. So, as network technologies advance and new converters are introduced, the management module of today can support the media converter of tomorrow. Similarly, our media converters can also be updated in the field. The firmware upgrade can be performed either locally via a Console port or remotely via TFTP. Furthermore, new converter addition does not require the reconfiguration of the SNMP management settings.
Transition Stand Alone Media Converters
Our family of Stand-Alone Media Converters are designed to be used:
Transition Ethernet PCI Converters
Deliver low cost, fiber optic connectivity to the desktop with these full-featured PCI powered media converters, designed to install directly inside a workstation or file server and mount into any slot on a standard PCI. No configuration is required; making installation a breeze. Since power is drawn directly from the PCI slot, no additional power supply is needed.
Transition Multiport Unmanaged Media Converters
KVM switches over the network
KVM Switches over IP provide the ability to have secure access to your systems over local area network, WAN or Internet.
We offer two solutions:
The AdderLink IP
Is a simple but very effective and low cost solution to either access a single system over IP or to access a compatible KVM switch and access multiple systems over IP.
The SmartView World
A high end product for multi-system access over IP.
See details of the products below.
KVM Extender Technology
Sometimes there is a requirement to extend keyboard, video, mouse control over a long distance. For example, if the system must be in a secure room but the use of it is outside that room.
We offer a number of solutions to that requirement.
Digi Connect Wi-ME 1 port Serial-WiFi Device Server Module
The Digi Connect Wi-ME is a fully customizable and secure 802.11b wireless embedded module. It is based on the common platform design approach of the Digi Connect™ family of embedded products, which minimizes design risk and reduces time to market by allowing customers to easily accommodate both wired and wireless network functionality in a single future-proof product design.
The Digi Connect Wi-ME embedded module is pin-compatible with the Digi Connect ME, and makes fully transparent 802.11b integration possible without the traditional complexities of hardware and software integration work.
Built on leading NetSilicon 32-bit NET+ARM technology, the Digi Connect Wi-ME embedded module offers a seamless migration path to a fully integrated NetSilicon system-on-chip solution. It combines true plug-and-play functionality with the freedom and flexibility of complete software customization using the proven NetSilicon NET+Works® development platform.
AdderView Desktop and Rack KVM Switches
Digi Connect - Intelligent access with built in web server
Combining Digi and NetSilicon technology and eliminating the initial hardware design effort, the customizable Digi Connect SP device server is the ideal choice for Web- and network-enabled embedded software applications.
The Digi Connect SP device server provides a powerful and flexible off-the-shelf hardware platform. Built on leading NetSilicon 32-bit NET+ARM technology and the easy-to-use and royalty-free NetSilicon NET+Works development platform, it offers a migration path to embedded modules and a fully integrated integrated NetSilicon system-on-chip solution.
The Digi Connect SP Development Kit significantly reduces traditional design risks, accelerates the overall software development process, and delivers all integrated building blocks and tools to quickly and cost-effectively create flexible and secure Web and networking solutions.
Serial over Bluetooth
Secure and convenient wireless serial communications
Often you need to communicate with a serial device but a cable to that device would be impossible or inconvenient. Perhaps the device is mobile or in a location where running a cable is impractical.
Serial over Bluetooth wireless can be the solution for you. It enables serial communications over 10 metres (Class 2) or 100+ metres (Class 1) and requires no wires. A pair of devices can offer simple stand alone cable replacement or a single device can communicate with a Bluetooth equipped PC, laptop or PDA. Communications can be made secure with encryption and pairing of dedicated devices.
Contact us to discuss how this would work and to discuss our product offerings on 01480 414131.
Dexdyne netrix web based control system
netrix from Dexdyne is an innovative system that gives you access to remotely located plant and equipment. Much more easily than ever before.
Perhaps you need to monitor a generator at an unattended site; or receive an alarm or alert when the level in a tank gets too low, or a bearing is wearing out. Maybe you need to control a sluice or valve- and it’s a hundred miles away. Or perhaps you simply need to capture data from equipment in outlying sites, and bring this together at head office for operational management. Whatever your requirement for remote access, netrix makes it simple!
The netrix starter kit
For details on line and a demonstration of the system, click here
Bluetooth Adapters
Some laptop computers are Bluetooth capable already, in which case, you may like to look at additional products like our Bluetooth serial adapters.
However, if your PC is not Bluetooth equipped and you want to use Bluetooth to communicate with a phone, PDA, MPE3 player or serial adapter, then we have a number of Bluetooth adapters including PCMCIA and USB.
Look at the products below or call us for assistance.
KVM Cables
Cables for use with KVM switches. Please refer to specifications or call for advice as to which cables are required with KVMs for your applications.
KVM Cables
Accessories for use with KVM switches. Please refer to specifications or call for advice as to which accessories are required with KVMs for your applications.
Wi-Fi Antennae
A range of antennae which can be used with Digi wireless device servers and embedded wireless products.
Sarian Systems
Sarian Systems Ltd is the UK’s leading manufacturer of wired and wireless communication products for mission critical applications.
Their product range covers both wired technologies including PSTN, ISDN ADSL and wireless network technologies such as GPRS, EDGE, 3G (UMTS) and HSDPA.
Sarian solutions are sold to over 40 countries to blue chip companies such as American Express, BP Oil, British Telecom, Ingenico Fortronic, GTech Inc, T-Mobile and to major Telcos worldwide.
Cellular Antennae
Antennae for Cellular products.
Brackets and Mountings
Brackets and mounting systems for various products.
Power Supply Units
Power supply units including replacements, alternatives and high temperature options.
Digi Console Server
With Digi CM™, administrators can securely monitor and control servers, routers, switches, PBX, Firewalls and other network devices from anywhere on the corporate TCP/IP network, over the Internet, or through dial-up modem connections even when the server is unavailable through the network.
Digi CM employs SSH v2 encryption to keep server access passwords safe from hackers and supports all popular SSH clients, as well as secure access from any Java-enabled browser.
NEW: Digi CM is the first console server to provide a secure graphical user interface (GUI) for easy out-of-band management of Microsoft Windows Server 2003 systems.
Digi CM connects to serial console ports using standard CAT5 cables, eliminating the hassles of custom cabling. In addition, the Digi CM offers a PCMCIA card slot for adding dialup modems or wireless network cards. Flash memory cards can be used to save port logs and backup configuration files.
Digi CM is available in 8-, 16-, 32- and 48- port models, in a 1U rack-mount form factor.
Digi Passport Console Management Server
The latest entry in Digi’s console management line, the Digi Passport provides secure remote access to the console ports of computer systems and network equipment over Ethernet or dial-up connections. Offering native support for the Intelligent Platform Management Interface (IPMI), the Digi Passport can communicate with virtually any server or device.
With freeKVM, the Digi Passport also provides network-based graphical access to servers, providing a single interface through which to remotely administer systems and run desktop applications without the cost and complexity of traditional KVM over IP solutions.
Digi Passport offers:
When combined with the Digi Remote Power Manager, the Digi Passport offers a secure and comprehensive in-band and out-of-band infrastructure management platform. It provides dual Ethernet ports, optional redundant power and connects directly to the serial console ports of Cisco and Sun devices using straight-through CAT5 for hassle-free cabling. Modular adapters are available separately for simple connections to other servers and equipment. The Digi Passport is available in 4-, 8-, 16-, 32- and 48-port models.
This intelligent power distribution unit provides an easy solution for the supervisory control and management of attached electrical devices. When integrated with Digi CM or select PortServer® TS solutions, Digi RPM provides an interface for users to configure alarms for 24/7 "real-time" notification of out-of-spec conditions including load and ambient temperature.
Digi RPM also provides statistics on average/apparent power, RMS voltage/current, circuit breaker status and maximum current. It is available in both eight-port 1U rack-mountable and ten-port 0U rack-mountable versions.
Transition Industrial Switches
Transition Networks’ Industrial Switches are hardened devices designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments.
MiLAN Raven Series Advanced Media and Rate Converters
Standalone converters
MiLAN's Raven series of conversion solutions offers connectivity for a broad range of environments. Whether connecting two remote locations, or solving a difficult wiring closet issue, Raven products will meet your needs.
Our standalone converters are ideal for remote locations requiring a single, cost-effective fibre link. Both the standalone converts and modules may be consolidated into 19in rack systems, allowing for utilisation of a common product in the main or intermediate distribution frame and at the remote location. For those needing visibility into how their network is operating, Raven products provide a managed media conversion system.
MiLAN Raven Series Managed Media and Rate Converter Chassis Systems
Managed Media and Rate Converter Chassis Systems>
The Raven series modular converstion system is excellent value for fibre connections in wiring closets - whether the main or an intermediate distribution point. The chassis acts like an intelligent patch panel. The 19in, 3U high chassis allows you to convert UTP ports on high-end switches into fibre ports. You can mix and match fibre types and speeds within the chassis, a level of flexibility not afforded to you by switch vendors.
When you replace your switch with a newer model, you save the cost of fibre once again since it is already there in the Raven media conversion chassis.
The Raven series is designed with ease of use in mind. The UTP port will auto-detect the cabling type (cross over or straight through), the polarity of the pins, the speed of the port and the mode of the port without any user intervention. No more concerns about what type of device the converter is connecting - whether switch or server. The broad range of media for the fibre port delivers optimal flexibility in designing the network and upgrading the network in the future.
Raven managed converters have been designed with diagnostic functions as well. The LinkSentry (tm) feature allows for passing through physical layer failures from one media to the other. This allows for a higher reliability in your network by making all components aware of network failures as they occur. The management system sends traps when link failures are seen on the ports.
The ease of use, flexibility in network design, advanced diagnostic capabilities and management features make the Raven series of modular converters the optimal conversion product for your network.
Features:
Transition Multiport Managed Media Converters
Our family of Multiport Media Converters are designed to be used in environments when:
Transition Industrial Stand Alone Media Converters
Fibre Optic Cables and Patch Cords
Transition Stand Alone Power Over Ethernet Media Converters
Transition Bridging Stand Alone Media Converters
Transition Serial-Fiber Stand Alone Media Converters
Transition CCTV Video Stand Alone Media Converters
Perle
Perle Systems offers the most secure and reliable serial and I/O connectivity products for a wide range of applications and businesses. With over 30 years of experience, you can trust Perle's Console Servers for Data Center Management, Terminal Servers, Device Servers, Ethernet I/O and Serial cards to deliver the quality and support you depend on.
This trust is backed by a Lifetime Warranty on most of their products and our commitment to develop feature-rich products that offer flexibility, performance, competitive pricing and ease of implementation
Transition Networks
Founded in 1987 as Transition Engineering, the company's first products adapted coaxial cable to twisted-pair cables; connecting terminals to mainframe computers. The company was renamed Transition Networks, Inc. in 1995 and experienced continued rapid growth as its products evolved from general Ethernet networking equipment to a complete line of conversion technology solutions. In 1998, Transition Networks was purcha